Configuring the GPS Tracker Android by SMS Text Message

    The Application GPS Tracker Android has shown a great application utility scanning the phone for free on the platform GPS Gate and running as a service in the background.

    Now you can set all the parameters of this service via SMS text messages. For example, to change the scanning time to 60 seconds just send an SMS text message to your phone with the following contents: ##SRVTM=60;

    

    Configuration protocol:

        ##parâmeter 1,parâmeter 2,parâmeter 3,...,parâmeter 7;

    Example: 

       Send an SMS text message with the following content to mobile phone with GPS Tracker Android application: ##SRVEN=E,SRVTM=60,BEEP=23;

    Configuration Parâmeters:

        SRVEN - Enables and disables tracing. Allows value E or D.

        SRVTM - Sets the interval, in seconds, the trace messages. Allows value exceeding 60. (Example: SRVTM=180)

        GPSAC - Set the precision in meters of the GPS. Allows more than 10.

        EMLEN - Enables and disables the sending of mail. Allows value E and D. (Example: EMLEN=E)

        SMSEN - Enables and disables the sending of SMS. Allows value E and D.

        SMSADR - Sets the phone number that you receive the SMS message. (Example: SMSADR=+558388997755)

        EMLADR - Sets the email address for sending email. (Example: EMLADR=abcde@gmail.com)

        SMSNOT - Enables and disables notification of incoming SMS messages. Allows value E and D.

        BEEP - Does the phone beeps sound on the amount of times you want. Allows any value greater than 1.  (Example: BEEP=10) In this example, the phone will emit 10 beeps when you receive the SMS message.